HP laptops are generally reliable and high-performing. However, like all electronic devices, they can run into problems. One common issue is HP Caps lock blinking codes 3 long 2 short.
In this blog post, we will discuss the possible causes of this flashing, error code, how to fix it, and how to prevent it from happening again.
HP Caps Lock Blinking Codes 3 Long 2 Short
HP Caps Lock Blinking Codes 3 Long 2 Short indicates a hardware problem with the embedded controller, which is a chip on the motherboard that controls various hardware components such as the memory, CPU, and hard drive.
Why HP Laptop Blinks 3 Long 2 Short
This error code can be caused by several factors.
Faulty Memory
Faulty memory can cause the error code to appear. It can be fixed by reseating the memory, correcting the memory configuration, testing with known good memory, or replacing the affected component.
Corrupted BIOS
When it’s a BIOS issue, resetting it to its default settings should do the trick.
Loose connector and damaged motherboard
If the motherboard is damaged or there’s a loose or broken connector, this can also trigger the error. Fixing it involves either replacing the motherboard or repairing the connector.
How to fix the HP 3 long and 2 short caps lock?
Reseat the memory
Reseating the memory is a process that involves removing and reinstalling the memory modules in your HP laptop. This process can help fix the light flashes, which can be caused by faulty memory. Reseating the memory can be done by following these steps:
- Turn off your laptop and unplug it from the power source.
- Remove the battery from your laptop.
- Locate the memory compartment on your laptop. This is usually located on the bottom of the laptop and is marked with a small icon that looks like a RAM module.
- Remove the memory module by gently pushing the clips on either side of the module away from the module.
- Carefully remove the module from the slot by pulling it straight out.
- Reinsert the memory module by aligning the notches on the module with the notches on the slot and pushing the module straight down until the clips snap into place.
- Repeat the process for any additional memory modules.
- Reinsert the battery and plug in your laptop.
- Turn on your laptop and check if the error code has been resolved.
Reset the BIOS
If reseating the memory does not fix the error code, you may need to try other solutions such as resetting the BIOS. Resetting the BIOS involves restoring the BIOS settings to their default values, which can help fix the error code caused by a corrupted BIOS. To do this follow these steps
- Turn off the laptop and unplug it from the power outlet.
- Press and hold the power button for about 15 seconds. This will force the laptop to turn off.
- While the laptop is turned off, press the Esc key repeatedly.
- When you see the Startup Menu, press the F2 key.
- In the BIOS Setup screen, use the arrow keys to navigate to the Load Defaults option and press Enter.
- Select Yes to confirm that you want to reset the BIOS.
- Press F10 to save the changes and exit the BIOS.
- Power on the laptop and see if the error code is gone.
Replace the motherboard
Replacing the motherboard is another solution to fix the HP flashing codes 3 long 2 short issue, which can be caused by a damaged motherboard. However, replacing the motherboard can be a complex process that requires technical expertise and specialized tools.
The process of replacing the motherboard may vary depending on the HP laptop model, but it usually involves opening the laptop, disconnecting the cables and connectors, removing the old motherboard, and installing the new one. After replacing the motherboard, you may need to reinstall the operating system and drivers and check if the error code has been resolved.
How to prevent the HP Caps Lock blinking codes 3 long and 2 short from happening again?
To prevent the HP blinking codes 3 long 2 short from happening again, here are some preventive measures that can be taken:
- Use only compatible and high-quality RAM.
- Regularly update the BIOS to the latest version.
- Ensure that the memory modules are correctly installed and seated.
- Avoid physical damage to the system board.
- Use a surge protector to protect the laptop from power surges.
- Regularly clean the laptop to prevent overheating.
- Avoid overclocking the CPU or GPU.
- Keep your laptop cool by using a laptop cooling pad.
- Back up your data regularly.
Conclusion
Dealing with the HP Caps Lock blink codes can be quite frustrating for HP laptop users. However, it’s a relatively common issue. Knowing what might be causing it and how to address it can help you quickly get your laptop back in working order. Moreover, by following the tips provided in this blog post to prevent such occurrences, you can lower the chances of running into this error code again down the line. It can also work for hp omen models.
Hp Caps Lock Blinking Codes 2 Long 2 Short
Welcome to TechSwiftGadgets.com, a blog authored by Sunny. Sunny is a tech enthusiast who specializes in providing solutions for common laptop issues. His articles are about fixing laptop problems, information regarding laptops and SODIMMs.
These articles are very helpful for the readers. Whether you’re a tech expert or a beginner wanting to learn more about your laptop, Sunny’s clear and simple writing keeps you hooked. Join Sunny on his tech journey as he continues to share valuable insights and handy laptop fixes.